Back in 2018, I was lucky enough to receive a very rare “Roberker” figure. It is an Archive Miniatures figure circa 1978. It comes from the “Star Rovers” line.
Roberker is a giant flame-throwing robot (Archive #2010). It is nearly 3½”/85mm tall, and was supposedly one of the largest robots on the market back then. Its arms end with flamethrower nozzles. Archive’s creator, Nevile Stocken, commented on FaceBook that it was his creation, and inspired by Fred Saberhagen’s Berserker novels. I wrote about it back in 2018 here and you can check it out.
I did not think I would ever see another one – but thanks to an open search on eBay, I managed to see an incomplete one that I bought in 2024.
I’ll describe how I built the model and share some finished photos and a video link.
Work in Progress Shots
The photo from the eBay listing
It was missing an upper arm, and I knew that like the last one I built, that this would be a challenge of construction more than painting. The build would be the tough part – specially as this one was incomplete. The photo below shows the pieces I got plus the old Roberker that I had previously completed. I needed to look at it often to remember how to rebuild this one.
The old Roberker looks plaintively at the remains of an incomplete kit.The model’s base underside showing its date and SKU number.
Of course, green stuff, paper clip wire, and polystyrene can be shaped in many ways. To rebuild the upper arm, I took polystyrene tubing, and sized up the appropriate length using the one other upper arm piece that I did have. I sculpted green stuff for a shoulder, as well as to thicken and strengthen the PS arm.
Green stuff was a big part of the project. On the new arm, I needed to let it cure, then I could drill it out for the paper clip wire pinning attachments. Meanwhile, I took some small brass collars I had and added them to the ends of the arms to better approximate nozzles. I also repaired many depressions and gaps in the old lead. Lastly, I sculpted over the body parts so that later I could have better structural integrity with this bad boy.
Green stuff time!Green stuff, polystyrene tube, original opposite upper arm, and paper clip wire.Good shot of nozzle modificationsLeg repairs
Once all that had cured, I drilled out pin holes for the legs, shoulders, and arms. I used a combination of Gorilla Glue and green stuff to assemble the model. First, I used glue to get an initial bond, then green stuff to firm that up.
Of course, then more curing time.
The green stuff modifications are clear here – but the right arm kept drooping. To remedy, I affixed it to the right hip.
To keep the model upright, I then used two 2″ steel fender washers as a base.
Here the right arm is affixed to the hip – and the model is well-bonded to the steel fender washers.
I hand-primed the model with Vallejo Primers “Black” because the airbrush was on its last legs and clotting a bit.
Primed black.
The Createx “Wicked Aluminum” airbrush paint I had dated from 2017 – and definitely was not useable in my airbrush after 9 years. Luckily, while the name of the product had changed from “Wicked Aluminum” to “Wicked Aluminum – Medium”, the SKU was still the same (W354). The new bottle worked well. After the aluminum paint had dried, I decided that this Roberker needed differently-colored flames coming out of his head versus the previous model’s orange. A nice plasma-green seemed appropriate. Similarly, I painted the eye with a metallic yellow eye to better match the green flames. I tried to match the previous model’s base with a reddish combination of Citadel “Martian Ironearth” and “Martian Ironcrust”. Once that dried sufficiently, I shaded up the model.
All painted up and awaiting final varnish.Another view of the unvarnished figure.Varnished!
I removed the figure from the poster tack-covered specimen jar. Below some comparative shots of both Roberkers.
Eye Candy
Here are some eye candy shots on a moon landscape.
And a shot of the pair:
Oh yeah, I did promise you a video!
I love the old J. Geils Band song, “Flamethrower” – which I chose as a theme here. I did see the band in 1982 at Eisenhower Hall at West Point before they broke up at the height of their success.
Once again, I have to say that my inspiration to work on retro-sci fi stuff again came by way of the Combat Patrol WWIITM Retro Sci-Fi games that I ran at 4 conventions earlier this year. You can see those games at the following blog links: Cold Wars 2026, TotalCon 2026, and Huzzah 2026. They are really fun and a nice return to a genre that I really enjoyed.
Background Information on the Figure
Archive stopped producing figures in the early 1980’s and sold off its molds. According to Lost Minis Wiki:
Archive was probably run by Barbara and Nevile Stocken[1], this American company produced a wide variety of figures, many of which have been kept in production through other companies down the years. In the early 1980s they closed up and were superseded by R*kiiv.
I don’t know how many Roberkers are still out there – but I have two!
As always, I would love to hear your thoughts on this rehab – reconstruction-resurrection project. What do you think or know about Roberker?
The comments section awaits your opinions! Join the conversation!
Finally, below are a list of some references and links that might also be of interest. I use them to refer to when I forget painting schemes that I want to replicate – like Roberker’s!
References:
For a consolidated list of links for any of my previous “Old School Miniatures” blog posts, please see this page here.
I decided to take a break from painting up Wars of Ozz figures and terrain for a bit. Yes, golf still happily monopolizes a lot of my free time – ok MOST of my free time (winter eventually does come and no golf here then).
But even though we here in Massachusetts are in a minor drought, it does rain from time to time – and the sun even disappears for the night. No surprise there…so I could get some summertime hobby work in…
But what should I jump into?
Inspirations and Motivations
For me, inspiration came by way of the Combat Patrol WWIITM Retro Sci-Fi games that I ran at 4 conventions earlier this year. You can see those games at the following blog links: Cold Wars 2026, TotalCon 2026, and Huzzah 2026. (I also ran games at HAVOC 2026, but did not get to a blog post on that one). They were fun and a nice return to a genre that I really enjoyed.
As to which faction to get into – well, its a bit sad to say how I was motivated to do something feline. Why? Well, my daughter Ellen and my granddaughter Tabitha (Tabby) lost their pet cat Izzy a short while back. Also, our good blog buddy Roger from “Rantings from under the Wargame table” has lost another cat (Amy) not too long ago. This was in addition to a young cat named Flash a while back and a dog as I remember. Losing pets is tough. Therefore, in these kitties memory I went with the Felynxii from long-defunct Archive Miniatures. More about these retro sci-fi cats in a bit, but first some background stuff.
Background Information on the Figures
I have written many blog posts over the years about these old school miniature projects and companies – to include some information on their origins. I have two pages that catalogs my efforts that might be of interest to you:
For a list of my Old School miniature posts click here.
For a list of my Retro Sci-Fi and Sci-Fi miniature posts click here:
As you probably would notice on these pages, the majority of figures that I use for these projects and games are long out-of-production – to state it mildly. Most have come from two sources – Archive Miniatures(specifically the Star Rovers Line) and Crunchy Frog Enterprises (specifically the Critter Commandos line). The last time I painted an Archive figure was back in October of 2019. As for Critter Commandos, my last group was painted in March of 2018 – so its been a while.
Archive stopped producing figures in the early 1980’s and sold off its molds. According to Lost Minis Wiki:
Archive was probably run by Barbara and Nevile Stocken[1], this American company produced a wide variety of figures, many of which have been kept in production through other companies down the years. In the early 1980s they closed up and were superseded by R*kiiv.
All sourcing of original Archive Star Rovers figures for me has been from eBay. Years ago I did recast some for personal use.
As for Crunchy Frog Enterprises, the Lost Minis Wiki says:
Team Frog Studios was founded in 1987 by Paul Arden Lidberg. They are a game publisher using the imprints Crunchy Frog Enterprises and Nightshift Games. They produce games with supporting lines of miniatures. They acquired the Living Legends & $tar Corp$ lines from Lance & Laser in 2009, and they ran some unfulfilled Kickstarter projects in 2012 & 2013.
The Crunchy Frog Enterprises website is still around. However I had some issues ordering Critter Commandos figures from them in the past. Perhaps it could be better now. As a result, I have only sourced their metal miniatures from eBay and Noble Night Games when I can find them reasonably priced. I still have a good number of them awaiting a paint job. The Critter Commandos line dates from the late 1980’s. According to Lost Minis Wiki:
Lance & Laser originally produced this Critter Commandos & Crittertek range of figures. [1] It is now owned by Team Frog Studios. The game Critter Commandos was created by Paul Arden Lidberg and first published in 1989 by Crunchy Frog Enterprises (now a “Team Frog Studios” imprint). The CFE codes on this page are those used by the imprint Crunchy Frog Enterprises; the figures have been renamed and recoded several times. Sculpted by Steve Lortz
Note that the late Steve Lortz was involved in sculpting both of these lines that I love. Until I began this post, I was unaware that according to Wikipedia, Paul Arden Lidberg passed away in 2022. RIP for both.
The two lines of figures mesh well for my purposes – as one would expect from the same scupltor like Steve Lortz – who also worked in a similar genres. It appears that Jim Johnson also sculpted for Team Frog.
Who Are the Felynxii?
For this particular project I chose to work on the Felynxii. Who are they?
The Felynxii are a race of bipedal anthropomorphic spacefaring Imperial felines from the Star Rovers universe. Archive made two distinct poses of these cats. The first figure was Archive #2070, “Felynxii, Imperial Scouts, Advancing”. The second was Archive #2071, “Felynxii, Imperial Scouts, Crouching”. I had 19 of these old metal figures, 7 of the “advancing” and 13 of the “crouching”. I’m pretty sure these are Steve Lortz sculpts, though they may be Nevile Stocken creations.
I decided one of these would be the platoon sergeant (a “crouching” figure), and two “advancing” figures would be squad leaders. Each squad would have an A and a B team. Each team would have a team leader (“advancing”) and three troopers (“crouching”). Some of the figures were in packages and some were loose. One or two had signs of early lead rot so I cleaned it up thoroughly before working on it.
That left me with a need for a platoon leader. I had a Critter Commandos figure called “MAJ Kitty”. I thought she was also a Lortz figure but is attributed to Jim Johnson on the blister card. Her Team Frog Studios SKU is 7648. I think I primed and dry-brushed her years ago. I decided that while her rank overqualified her to lead a platoon, she would do fine for my needs. As she is the sole representative figure made in the Critter Commandos line for “The Feline Confederation of Catslovakia”, she needed a job. Apparently unlike other Critter Commands factions, her kitty people were never properly fleshed out with other troops. Now she has a unit to lead on the tabletop. Meow.
The Figures
All of the figures I worked with here are definitely old school metal and 28mm. The Felynxii are armed with assault rifles, and MAJ Kitty looks like she has some sort of an anti-tank weapon. I’m calling it a “Katzooka”.
The Felynxii were sculpted back in 1977, and probably cast way back then as well. MAJ Kitty is probably from 1989-90 or so. All of the Felynxii figures are stamped on the base with their number and “1977”. It only took 49 years to get them painted! Almost all Archive figures were sculpted with a narrow rectangular base, whick doesn’t meet my needs for gaming. Therefore, I used Apoxie Sculpt and steel fender washers of different sizes to sculpt bases that would blend better on the tabletop. I did the same for MAJ Kitty’s base as well.
Let’s see the projects progress.
Project WIP
I had bought these figures years ago, so this diminishes my unpainted lead horde…
My starting supply of Felynxii figures. Some of the crouching figures had gotten some green paint on them but nothing like a priming coat. One had some minor lead rot. The advancing ones had been cleaned up by me years ago – and may have also had some paint on them back then. Note the 2 ones in the blister!
Below is a close up of one of the blister packs. 75 cents is a good deal!
Close ups photos of a crouching figure before painting:
Below are close ups of an advancing figures before painting:
The MAJ Kitty blister card with the already primed and dry-brushed figure.
The next step was to sculpt around the metal bases with a two-piece epoxy (in this case Apoxie Sculpt).
Once the epoxy had cured, I mounted the figures with poster tack to specimen jars and primed any that needed priming in black. After the primer cured, I dry brushed all to match MAJ Kitty’s state.
After dry brushing, it was time to start painting. Here are some shots before I got to adding any distinctive flocking.
The figures painted minus any base work or varnish.
For the bases, I wanted to have a deep brown clay-like look with Citadel’s now-OOP “Blackfire Earth” texture paint that would give a bit of granularity as well as contrast with the planned use of alien tufts.
Once the texture paint had dried on the sculpted bases, I added shading before varnishing the lot.
After varnishing, I added lots of differently-colored flocking. This will aid in tabletop recognition for players, as well as to add a lot of alien colors to the mix.
Let’s see some eye-candy. These shots are not as good as the ones you will see in the Instagram post at the end, but they will do. My lighting was challenging.
I also show the data cards that I made for my convention games – they are 3.5″ by 5.5″, with the reverse side (not shown) being the common Combat Patrol WWIITM quick reference card. Note that the data cards are color coordinated with the units to an extent. There’s also those kitty names…
The Felynxii Imperial Scout Platoon
MAJ Kitty, Platoon Leader
Base label
Platoon Sergeant – SFC Izzy
Base labelData card for the Platoon HQ
1st Squad
1st Squad Leader -SSG FLASH
1st Squad Leader Data card
A Team, 1st Squad
A Team, 1st Squad data card
B Team, 1st Squad
B Team, 1st Squad data card
1st Squad Group Shot
2nd Squad
2nd Squad leader – SSG AMY
2nd Squad Leader data card
A Team, 2nd Squad
A Team, 2nd Squad data card
B Team, 2nd Squad
B Team, 2nd Squad data card
Felynxii Imperial Scout Platoon Group Shot
For a quick live (and perhaps better lighted) overview please check out my Instagram link:
In the future, I have some plans to potentially add some feline-themed armor to their ranks. Stay tuned.
Thanks for taking a read about this project. My hope is that you found it interesting and informative about some figures that you never heard about before or maybe just forgot about. While I do not own a cat (I am currently allergic), my daughter Ellen and granddaughter Tabitha like them a lot, and did not replace Izzy, so I hope they like the project too.
As always, I would love to hear your thoughts on the Felynxii here – did you find any aspect more interesting than another? Did I make the right choice to jump into as a project? Do you have any favorite figure or team?
The comments section awaits your opinions! Join the conversation!
Finally, below are a list of some references and links that might also be of interest. I use them to refer to when I forget painting schemes that I want to replicate.
References:
For a consolidated list of links for any of my previous “Anthropomorphic Figure Project Posts”, please see this page here.
For a consolidated list of links for any of my previous “Old School Miniatures” blog posts, please see this page here.