Rehabilitating Woodstock

Two totally unrelated things conspired to make me jump off my Spanish Conquest/Mesoamerican hobby path for just a short August detour. The first was my desire to participate in Dave Stone’s Season of Scenery challenge. I did get in that last year with my cityscape build for Tenochtitlan, the Aztec capital. My challenge this year was that I really did not need any more scenery for those games. The second thing – and we are talking about scenery here – was right in my back yard.


Yes, that Woodstock from the late Charles Schulz’s Peanuts. Or rather the resin yard sculpture of Woodstock that we have had in the back yard for so many years that I don’t remember when we got it. Plus, I grew up reading the strip and still do in the reruns in the daily newspaper (which, yes, I still get daily). I think Peanuts still holds up.

As some of you remember, my wife Lynn and I had a cockatiel named Caesar who passed away on January 1st in my wife’s arms.

Miss this guy…

Woodstock looks somewhat like a cockatiel (but Schulz never would specify exactly what kind of bird he intended him to be).

In any case, as Caesar was part of our family, we naturally have had several bird-themed decorations inside and outside of the house. One of these is the aforementioned resin yard sculpture/ornament of Woodstock wearing sunglasses while lounging on a chaise lounge for many years. The New England sun, snow, heat and rain have taken their collective toll on the dude. But, back to my original point, he’s part of the scenery! And he is a fond reminder of Caesar. So, as such, I decided to rehab Woodstock for my backyard and for Dave Stone’s Season of Scenery.

View from the putting green towards the fire pit and the flower garden behind it – see the circled bench!

And it’s been quite hot this summer – and we are in a drought so my grass (not the artificial putting green) are pretty burnt. You can see below that Woodstock has long since been separated from his chair. My granddaughter Tabitha does likes to hold him. As he’s no longer affixed, I thought I’d rehab Woodstock and keep him removable but also make him more secure on his chaise lounge as well. Therefore, as fate would have it, I could do that and use him for Dave’s annual scenery challenge!

I decided to use a combination of paints and varnishes – craft paints, old primers that are no longer good to airbrush with (i.e. too prone to clot and jam up an airbrush), and some rattlecan varnishes and lacquers left over from my pre-airbrush days. Add to that some other paints (which I list at the end of this post for those interested).

First, I washed and scrubbed the piece – it had a good amount of grime on it and I wanted the primers to really adhere. A few ants had taken up residence in it as well and kept wandering out at random times despite the cleaning.

The chaise lounge also had a good-sized crack that I repaired with green stuff.

Green stuff repair.

The next challenge was how to paint the two pieces without handling them. For the chaise lounge, I just did each side and allowed for drying. For Woodstock, I needed a support jig – so I built one. The drilling also allowed for magnet insertion later with a bigger hole centered on the smaller one (not shown immediately below but later on in this post).

As for the jig itself, I reused a blot of wood that had a few holes that I had used to support 15mm tank turrets on previous projects. I had a longer bolt for the support that I drilled from the bottom side, and added several washers so that the bolt head would not touch the ground when flipped over and supporting Woodstock. I secured all the washers and the bolt with wood glue.

The bottom of the jig showing the washers and the support bolt in the middle.
I let the glue on the jig set overnight. The long support bolt is unseen up against the edge. I used another block and the DeWalt drill bits case to weigh it down while drying.

For Woodstock, I scribed over his mouth and eyes with an awl before priming him. I then secured Woodstock and brush primed with some older primer that was no longer suitable for the airbrush but was still good enough for the brush.

Woodstock on the jig, primed.

From here, it was onto the chaise lounge base. It needed to be primed both on top and on the bottom as there were some rock-like and bush-like structures underneath that were not well-defined. These I painted and then added a glossy wash for depth. Over the repair, I had previously etched the wood grain of the chaise lounge.

I still wanted more definition in the wood grain. I tried a wash but the result was highly unsatisfactory – it came out horribly blotchy. So I repainted the base chair and decided to dry brush it instead- which worked much better. After all, it should retain a “cartoony” look right? I used an airbrush yellow paint with a brush on Woodstock and painted his eyes, mouth, and sunglasses.

Getting closer to the finish. This is after I repainted the chair but before the dry brushing.
After dry brushing the chair. I added a bluish color to the sunglasses (not shown here).

Before I was to varnish, I needed to install Woodstock’s magnet and a washer into the base. Originally I planned to put in a magnet into the base too – but upon drilling it I discovered that the base was more hollow than I knew (hence the ants too). So, I chose to insert a 3/4″ zinc-coated washer and secured the gap with E6000 epoxy.

The magnet and the washer will allow Woodstock to be removed with a little effort but not fall out at rest.

All that remained was to apply varnish and lacquer. Luckily, I still had some old rattlecans from my pre-airbrush days – and I gave each a couple coats of good coverage.


So how does he look in the yard?

On the bench!
By the house back deck!
Before and after!

Most importantly, Tabitha approves!

Thanks for looking at this little diversion from my normal pace – hope you found it as fun as I did! Or Tabitha!


  1. Kneadatite (green stuff)
  2. Gorilla Glue
  3. A block of 2″ X 4″ wood
  4. Elmer’s Wood Glue
  5. 1/8″ x 1″ Everbilt Fender Washers
  6. 4″ bolt
  7. 1/4″ magnet
  8. Multiple drill bits of different sizes
  9. Vallejo Surface Primer “Grey”
  10. Vallejo Surface Primer “Russian Green”
  11. Vallejo Surface Primer “German Green Brown”
  12. DecoArt “Honey Green Brown”
  13. Citadel “Agrax Earthshade GLOSS (wash)
  14. Americana “Black Tie Satin”
  15. Americana “Santa Red”
  16. Com-Art Colours “Opaque Hansa Yellow”
  17. FolkArt “Yellow Ochre”
  18. Craftsmart “Neon Blue”
  19. Citadel “Contrast Paint – Talassar Blue”
  20. Krylon “Matte Finish” (varnish in rattlecan)
  21. Testors “Dullcoat” (lacquer in rattlecan)
  22. E6000 epoxy
Tiny Painted Heroes

The Adventures of a 50-Something Tabletop Gamer, Game Design hobbyist, and full-time Software Engineer

Home of the Grumpy Gnome

Tinkering with Artwork and Ideas

Steve's Paint Brush

Grimdark model making and mini painting

Wargamesculptors Blog

Life, Golf, Miniatures, & Other Distractions

Dead Dick's Tavern and Temporary Lodging

Life, Golf, Miniatures, & Other Distractions

Guru PIGS Blog

Guru's thoughts on wargaming, life, and the universe!

Wisely lead... without a head!

History, Miniatures and Wargaming

Kuribo's Painting

Fallout, MESBG, and Hellboy Painting, Terrain, Dioramas, and Battle Reports

Don't Give Greg Ideas

Seriously, just don't

War Across the Ages, and other dark horrors

A discussion of miniatures collecting, painting and gaming.

Classic Warhammer 40K

Painting diary focused on Warhammer 40K 2nd ed., 5th ed. WHFB, related GW games, and miscellaneous whimsy

Colonel Mustard

WW2 Modelling in 1/72 Scale


Random painting and terrain making.

Pat's 1:72 Military Diorama's

Scale diorama tips and ideas

Arcade Dreams

Building the Arcade Dream


Phil's 20th century wargame pages

SP's Projects Blog

A futile fight against entropy or 'Every man should have a hobby'? Either way it is a blog on tabletop wargames, board games and megagames


Wargaming Plausible reality?


dave's gaming adventures:

The Imperfect Modeller

Miniature Figure Painting and Diorama Modelling

Double Down Dice

Painting miniatures and rolling dice!

Just Needs Varnish!

My ongoing wargames projects!


Sculpting some worlds


Wargaming with the ability of a dull nine year old

Dawn of the Lead

Miniature wargaming and the occasional zombie

Rantings from under the Wargames table

Wargames, Figures, Sculpting and Converting Miniatures

Simple as WaR

Miniatures & Terrains

Buck's Blog

Life, Golf, Miniatures, & Other Distractions

IRO aka Imperial Rebel Ork

- I model - therefore I am -

Azazel's Bitz Box.

Painting, Modelling, Miniatures, 1:6, Games... Whatever else I find interesting.


Smallholding and Wargaming.......not always at the same time!


Nørdblog numero uno

Harry Heckel

Writer/Game Designer

The Lost and the Damned

Fantasy, sci-fi and historical miniature gaming


Toy soldier wargaming stuff.