French Armor for the 80th Anniversary of the Battle of France: Hotchkiss H35 and H39 Light Cavalry Tanks

Amazingly, this upcoming May-June 2020 will mark the 80th anniversary of the Battle of France.  I am curious as to how it will be remembered – if at all.  Certainly I would think that both the French and the Germans will likely shy away from commemorating the event for diametrically opposed reasons.  Yet, it is definitely worth remembering it as a seminal event that without question fashioned all of the world’s history since.

I have studied this battle since my days at West Point.  I was fortunate there to study with the then-USMA Department of History Chair COL Robert A. Doughty (now a retired Brigadier General).  I was able to participate in a class (HI498 – a colloquium) with him and just one other cadet during my second semester senior year as part of my concentration of studies in French.  A side note – my class – 1984 – was the last class not to have majors – we had concentrations.  This meant we could choose 8 classes outside of the 44 classes in the core curriculum.  As I love military history, especially French military history, this colloquium was a great opportunity.  We studied Alistair Horne’s works among others.

BG Doughty has authored many books (just check out this list on Amazon), many that focus on France from WWI to WWII.  I recently got two excellent books on the subject that he published after I graduated that I have not read: The Seeds of Disaster: The Development of French Army Doctrine, 1919-39, (which discusses how the French Army came to set themselves up for disaster) and The Breaking Point  (dealing with the pivotal Sedan breakthrough in 1940).  I also plan on rereading Alistair Horne’s To Lose a Battle: France 1940 as well.

The reason for all this reading and research is (well, besides for pure pleasure) to prepare myself to be fully knowledgeable ready to run several tank battle games set in France in May-June 1940 using the What a Tanker© rules.  Obviously, the games will be, at best, an abstraction of what happened.  However, I wanted to have requisite knowledge of the battle and to prepare and build suitable models for both sides to give a proper flavor to the conflict that shocked the world.  I did get an A- in the colloquium, but that was 35½ years ago, I want to refresh!

Previously, I have built French and German tanks and run several France 1940 games described in this blog – but my 15mm/1:100 scale tank inventory was quite lacking in terms of the wide variety of vehicles used.  I aim to remedy that.  I am currently planning on running a game at TotalCon in February, and at HAVOC in April.  I may do others as well, plus club gaming sessions.  This blog post describes the first chapter of my preparation and force building upgrades for those events – four Hotchkiss light cavalry tanks (one H35 and three H39’s).

I will go over a bit of history of the Hotchkiss tanks and then show some WIP shots of the models.  I will then share some eye-candy shots of the finished models.  Lastly, as per usual, I will share the paints and materials used in this project.

The H35 tank was originally rejected by the infantry, who chose the R35 instead.  It was intended to be a light cavalry tank, though it did equip some infantry tank units as well.  Hotchkiss built around 1200 H35’s and H39’s, with the majority being H35’s.  The Hotchkiss company was actually founded by an American from Connecticut, Benjamin Hotchkiss.  He was a Union ordnance engineer at Colt and a munitions builder during the American Civil War.  Finding no US business after that conflict, he moved to France and set up his own company.

The H35 and H39 both had the same  37mm SA18 gun that many French tanks had though the H39 had a longer barrel with better armor penetration (30mm vs 23mm of armor with the shorter barrel).  Given that a Panzer IIIE of the time had 30mm of armor all around, this was not adequate to be sure.  It had a crew of just two, which made it challenging to operate effectively in battle.  Three out of four of the armored divisions’ tank regiments had Hotchkiss tanks (the other one had SOMUA S35’s).  The armor was adequate, but with a range of only 80 miles and a top speed of 17 mph, it was not very cavalry-like.  On top of it all, it was tough to drive and mechanically unreliable.

After France capitulated, both Germany and Italy got Hotchkiss tanks.  Some of these Italian vehicles faced US Army Rangers in Sicily.  After the war, some Hotchkiss tanks served on with the Israeli Defense Force until 1952.

I acquired a 3-vehicle packet from Battlefront Miniatures (#FR020) and one single H39 vehicle from Peter Pig (#PP33).  The Battlefront ones could be either H35’s or H39’s.  In the end, one of the H35 guns was unsatisfactory, so I ended up with one H35 and three H39’s.  In the game, there are no differences statistically between the two types.

1 Hotchkiss tanks at start
Here are the models – the Peter Pig one was all metal.  The Battlefront ones had two different engine hatches depending on what version was to be built.  These were relatively easy to assemble and prep for painting.
2 Hotchkiss tanks assembled
Assembled and magnetized Hotchkiss tanks.  From left to right, Peter Pig H39, Battlefront H35, and two Battlefront H39’s.  
3 H35 assembled
The Battlefront H35 gun was drilled in and affixed with Gorilla Glue.  Later, the drill holes were filled with kneadatite (green stuff).
4 H39 Bottom Peter Pig assembled
The bottom of the Peter Pig H39 model.  For reinforcement of the tracks, I added green stuff under the chassis.  I also added a magnet to the inside of the turret so my knocked out tank blast markers would stick to an otherwise non-magnetic model.
5 H39 Battlefront assembled
H39 showing green stuff around the longer gun.
6 Hotchkiss tank chassis painting mounts
My mounting arrangement for the tanks.  I did paint and varnish the tracks first.
7 Hotchkiss tank turrets painting mounts
Turrets ready to paint.
8 Tracks first!
This shows the H35 after the tracks were painted, washed, and lightly varnished.
9 Double Primed showing metal exposure
Then the models were mounted and primed.  I had a challenge priming the exposed metal parts as you see here – I needed a few thin coats.
9a Double Primed showing metal exposure
The priming issue (exposed metal) was more difficult for the Peter Pig model as it was all metal.
10 H35 masked for airbrush
After priming, the H35 awaits set up for base coat painting.  Protecting the already painted tracks with poster tack was the first step.
11 H35 masked for airbrush camo
I was not thrilled with the yellow, but I darkened it.  Here, I applied more poster tack to apply a camouflage pattern.
12 H39 masked for airbrush camo
The H39’s got their base coats, and then I used an Iwata Micron airbrush to blend in some browns on the green.  As I researched tanks of this era on the French side, I found that there was no standardization of tank painting schemes.
13 H35 masked for airbrush camo after
The H35 under the poster tack for a camouflage scheme.  
14 H39 close up after camo
The Peter Pig H39 model showing the added brown color airbrushed across the tank.
15 H35 close up after camo
After removing the poster tack from the H35, this was the result.  
16 H39 close up before decals and weathering
I then washed the vehicles with Army Painter Military Shader.  All that was left was adding decals, weathering, and final varnishing.
18 Tiny decals
Battlefront decals – so tiny.  I still do not understand why the roundels are two piece decals.

Now, I would like to share the finished vehicles – eye candy (at least I hope you find them nice to look at).

Battlefront H35

1 H35 left side
Right side view, Battlefront H35
2 H35 frontside
Front view, Battlefront H35
3 H35 right side
Left side view of the H35.  The number is helpful for tabletop ID, but is historically correct.  The unit insignia is from the 4eme regiment de cuirassiers, part of the 1st Light Mechanized Division (DLM).
4 H35 rear view
The roundel on the back right.   
1a H35 left side
How I planned the paint job – I am hoping to get better tan/yellow tan paint for future French use, but after washing/shading, I think this is fine.  Do you?

Battlefront H39’s (two)

5 H39 (B model) left side
Battlefront H39 “#8” left side.  
6 H39 (B model) left front side
Battlefront H39 “#8” left front side.
7 H39 (B model) left rear side
Battlefront H39 “#8” rear view.
8 H39 (B model) right side
Battlefront H39 “#8” right side.
5b H39 (B model) left side
My plan for the “#8”.
12 H39 (D model) right side
Battlefront H39 “#64” left side.  This was the only Hotchkiss tank I built with a number on the right side of the turret.  Again, markings were definitely not standardized.
13 H39 (D model) right front side
Battlefront H39 “#64” right front side.
14 H39 (D model) left side
Battlefront H39 “#64” right side.
15 H39 (D model) rear view
Battlefront H39 “#64” rear view.
12a H39 (D model) right side
How I modeled the vehicle.

Peter Pig H39

9 H39 (C model) left front side
Peter Pig H39 “#21” front left view.


10 H39 (C model) right side
Peter Pig H39 “#21” right side view.  After weathering was added, the side looked similar to the Battlefront models.
9a H39 (C model) left front side
I did not have a #41!
11 comparing Peter Pig vs Battlefront
This is a side-by-side comparison of the Battlefront (left) and Peter Pig (right) H39’s.  I like both – though my preference is for the Battlefront models – which are resin and metal.  However, many of the models I need for this project are hard to find and not made by Battlefront, and sometimes with some manufacturers you need to buy up to five vehicles.  With Peter Pig, I can just get one  vehicle (QRF with metal models sells one at a time as well – and you’ll see some of their vehicles soon too).  Old Glory usually sells 3 vehicles (all metal) in a pack.

Group Shots

16 Group Shot16a Group Shot

This concludes my very last post of 2020 – and the beginning of this project.  (I will be doing a 2019 round up of course – but that will be coming later this week).

More Battle of France vehicles (French and German) will be coming and I hope that you will find them interesting.  If you have any feedback, good, bad or otherwise, let me know in the comments section – I do appreciate knowing what you think.

Thanks for looking and Happy 2020!


  1. Isopropyl Rubbing Alcohol 91%
  2. Microscale Liquid Decal Film
  3. 1/8″ neodymium magnets
  4. Green stuff (kneadatite)
  5. Gorilla Glue
  6. Poster tack and ¼” square wooden dowels on plastic plates
  7. Reaper MSP “Black Primer”
  8. Vallejo “Black Grey”
  9. Vallejo “Surface Primer – USA Olive Drab”
  10. Vallejo “Flow Improver”
  11. Vallejo “Airbrush Thinner”
  12. Vallejo Model Air “Pale Green”
  13. Vallejo Game Air “Black”
  14. Battlefront “Army Green”
  15. Army Painter “Military Shader” (shade)
  16. Battlefront “Dark Gunmetal”
  17. Vallejo Model Air “Rust” (71.080)
  18. Vallejo Model Air “Matt Varnish”
  19. Vallejo Model Air “Sand Yellow” (H35 only)
  20. Battlefront “Army Green”
  21. Vallejo Model Air “Dark Brown” (H39’s only)
  22. Battlefront “Oxide Red”
  23. Vallejo Model Air “Glass Varnish”
  24. Appropriate decals from Battlefront
  25. Microscale Micro-Set
  26. Microscale Micro-Sol
  27. Vallejo Weathering Effects “European Thick Mud”
  28. Vallejo Weathering Effects “European Splash Mud”
  29. Vallejo Weathering Effects “Crushed Grass”
  30. Vallejo Mecha Varnish “Matt Varnish”

Author: Mark A. Morin

This site is where I will discuss stuff that I find interesting and that includes family, friends, golf, gaming, and Boston sports!

26 thoughts on “French Armor for the 80th Anniversary of the Battle of France: Hotchkiss H35 and H39 Light Cavalry Tanks”

    1. I use the poster tack for French camo painting that was discrete, that is to say not blended like you saw in the other green/brown tanks. I kind of discovered that technique on my own without anyone else suggesting it so I’m kind of proud of it. Thanks for noticing!

      Very nice of you to say – but I don’t think I have the academic chops to write a peer-reviewed history book. I may write rules, but books probably not. For one thing, I need time to paint!

      How about your novel -I’d read THAT!

      Happy New Year my friend. I’d say mate, but from me that has a whole different connotation ya know!

      Liked by 2 people

  1. Excellent post, Mark! Very nice work on those tanks! You’ve done well picking your camouflage and marking schemes in what appears to me to be a complete nightmare of choices! Good options with the Battlefront models getting both different gun barrels and engine deck variants.
    Whereas France and Germany may not celebrate the Battle Of France, I’d imagine the Brits will celebrate the 80th anniversary of the Dunkirk evacuation. And I hadn’t thought about it, but maybe I need to get a move on with my French armour for the 80th anniversary – I’ve been focused on the 150th anniversary of the Franco-Prussian War and the centenary of the Miracle On The Vistula (Russo-Polish War), both happening this year as well, but I’d only need to do a few tanks for France in 1940!
    Here’s hoping you have a great 2020!

    Liked by 4 people

    1. I thought this post might resonate a bit with you John! As for Dunkirk (and of course) the Battle of Britain I am sure that the Brits will commemorate these accomplishments as well as subsequent ones. If you’re French, it was a disaster, and if you are German, well commemorating any thing related to Hitler is pretty dark. I am hoping the games I will run will be instructive to gamers. As a group, Americans are pretty bad knowing history.

      As for future additions on the French side, I will have a few AMC 35’s, a Char D1/D2, a Panhard 178 or two, a token FT-17, and an R40. For the availability Germans, I’m going to add to the ones I have and convert some existing ones – adding some 6-rad scout cars, some Panzer 35 (t)’s and Panzer 38 (t)’s, converting some Panzer IV D’s to A’s and B’s, and adding some more IVs. Hope you have a great New Year John!

      Liked by 3 people

  2. C’est beau. Bravo!
    I suspect the French will be pretty low key on the Battle for France anniversary. My memory of my time in France is the efforts of the resistance and the Free French are lionised pretty much to the exclusion of the rest of the war.
    Bon courage with the games.

    Liked by 2 people

  3. Sorry I’m so late Mark Christmas has put me right out of wack this year!
    I don’t know how you can work with such tiny decals mate you must have eagle eyes.
    And a happy New year to you and your fine family, cheers Pat.

    Liked by 2 people

  4. Thank you very much for this. I am trying to start a French early-war force, and the models are scarce, as you observe. Your comparisons of different makes has helped me to decide which ones to go for. Cheers !

    Liked by 1 person

    1. That’s great to know Graham, one of the main reasons for my blog is to share what I have learned with fellow gamers and hobbyists, so I’m happy that it helped. Model availability (or the lack thereof) is an issue, as is variability of quality. I have enjoyed running my France 1940 What a Tanker scenario, though with COVID-19 I was unable to properly and timely commemorate May-June 1940. But I certainly will at some point. Good luck with your early war force build! Best, Mark


Leave a Reply to Dave Stone Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s