Khang Robots

This post is about another group of miniatures that I acquired in March from the recently closed Wargames Supply Dump (thanks so much Roger!).

These are DG-08 and DG-09, Khang Robots.  One model is tracked, the other has legs.  I purchased 2 kits of each type of robot.

I’m currently planning on building out a series of different squads and platoons for use in retro-sci-fi skirmish games using the Combat Patrol™ system of rules.  I have described previously here in this blog my casting work on making a platoon of Archive Miniatures Mark III Warbots.  I thought these Khang Robots would be great as leaders for that platoon.  They look so very retro!  The tracked version really evokes the old “B9” from the 1960’s TV series Lost in Space.

Additionally, I eventually will be painting up a unit of WSD Khang troopers, and I can use these four robots to augment those forces as well.

The kits arrived, and I washed them with a light scrub with soap and water, and let them dry.  Once dry, I assembled them with super glue.  I tried to glue each robots’ arms so that they would each have a different position for better aesthetics.  After they were together, I affixed them to 1¼” steel washers using Loctite glue for ease of eventual magnetic box storage.  Then, I used poster tack to affix the models to popsicle sticks for ease of painting.  This is now my new favorite tactic as it is very easy to remove after painting.

I then primed them (top and bottom) with Krylon “Ultra Flat” white matte spray paint.  This allows me the option to write (with a fine-tipped Sharpie) on the washer bottoms with info that I’d like to have on them, such as the model’s name, the date of completion, my name, and any unit identification.

After the primer dried, I gave the models an aggressive wash with Citadel “Nuln Oil”.

 

 

 

 

 

 

 

I used Vallejo Model Air Metallics “Steel” as the primary base coat for the models’ helmets, shoulders, belt, and claws.  I painted the waist/ribbed chest area with Citadel “Mechanicus Standard Gray”.  Then, for a shiny rubber-like look on the ribs, boots, and legs, I applied a coat of Armory “Gloss Black”.  For the front of the tracked bases and the chest-mounted cannons, I used Vallejo Model Air Metallics “Gun Metal”.  Then I highlighted the shiny parts on the shoulders and helmets with Vallejo Model Air Metallics “Aluminum”.  For the voice box (cannot really call it a mouth!) I added a light coat of Citadel “Spiritstone Red”.

Moving on to some of the details on the helmet, arm sockets, “ears”, and back components, I found a great solution with Vallejo Model Air Metallics “Copper”.  There were several lights on the front and back of the robots, and for these I used a spotter brush with Citadel “Yriel Yellow”, Vallejo Model Air Metallics “Signal Red”, Craftsmart “Sapphire”, and DecoArt “Crystal Green” – varying the lights a bit in the front.

For the vents in the front of the tracked figures, I used “Gloss Black”, with “Steel” on the vents.  I then extensively used Vallejo Model Air Metallics “Gold” and Craftsmart “Onyx” on bolt straps and bolts respectively throughout all the models.  I also used “Onyx” to highlight the “Gloss Black” painted parts.

I then chose some bright-colored metallics to theme the robots and make them easier to identify on the gaming table.  My four choices were: DecoArt “Crystal Green”, “Festive Red”, “Peacock Blue”, and Craftsmart “Amethyst”. I painted with these as you see below – as highlights on  the robots’ helmet crests, “ears”, belts, boots, and backs of the lower chassis (all depending on the models).  I did a lot of highlighting!

This completed my initial base coating and highlighting.  For the bases, I thought I’d use Citadel “Martian Ironcrust”.  This texture paint has a nice crackling effect if you use a blow dryer between applications (as I did) to dry the paint.  I also added some Army Painter “Black Battlefield” into it when it was still moist – and this worked well to give a realistic texture.  For the tracked models, I tried to make a track and chassis impression with the “Martian Ironcrust”.   I also tried to show the accumulation of dust on the tracks and boots with this texture paint.  I think it worked well enough.

 

 

 

 

I then moved on to serial washes with Citadel “Agrax Earthshade” on some lighter parts and “Nuln Oil” on others such as the ribs.  For the robots’ claws, I found that Citadel “Seraphim Sepia” gave a unique metallic tone to the claws.  On the bases, “Agrax Earthshade” really enhanced the cracks and gave a lot of depth to them.  I used a lot of washes to give depth to the figures.

 

 

 

 

I then waited  a day or so for the humidity to go down and for the temperature to be adequate for varnishing.  I sprayed the models with one coat of Krylon “Clear Matte”, followed by two coats of Testors “Dullcoat”, allowing for adequate drying time between applications.

 

 

 

 

 

 

 

 

 

 

 

 

These are pretty cool figures – and the downside is that pretty cool figures have a lot of details!  The upside is they give the painter a tremendous opportunity to create a nice visual product.  These are really fun retro sci-fi figures – and I hope that I did achieve success with these four.  I really like them, and am motivated to get going on the Mark III Warbots to complete the platoon – and to use my new airbrush to prime, base coat, and varnish this my next project.  Stay tuned, and let me know your thoughts in the comments section!  Thanks!