Robo Sentry Guns from WSD

Back in March of 2017, I read that WSD (Wargames Supply Dump) in the U.K. was shutting down its website and its figures from the Dirk Garrison line would no longer be available.  Very bad news!  I had not yet had the chance to buy any of these, and their retro sci-fi look lured me in to try to get a few before it was too late.

I was able to get a few different sets, which I will be painting up and using in my retro sci-fi games using the card-based Combat Patrol™ system.

The first ones I started were MIS06 “Robo Sentry Guns“.  These came in a two-pieces per kit.  As you can see below, the models were not greatly detailed, but very nice for what I wanted – unmanned and immovable guns for attacking infantry (or vehicles) to deal with during a skirmish.  They were sculpted by Jason Miller.  I wanted to buy 10, but only 5 were left by the time I tried to buy them.  I grabbed them as they were heavily discounted!


1 in bag
The Robo Sentry Guns as shipped



2 robo guns primed
The Robo Sentry Guns primed

I affixed the bases to a 1¼” steel washer using Loctite glue.  This tactic allows me to use magnetic sheets to easily store them in plastic boxes.  I then primed them with Krylon “Ultra Flat” matte spray paint.  I also made sure that I painted the bottoms white as well, as I find that leaves me the option to place information on the bottom that I’d like to have once the models are done, such as the model’s name, the date it was finished, and any unit identification, etc.  I just use a fine-tipped Sharpie.

I decided to paint the two parts separately, base coat both, and then assemble the kit after that.  I also made a change in my process in that I used 3M white poster tack from Michael’s to affix the bases to popsicle sticks for painting instead of white glue.  This worked MUCH better – and the tack is reusable – so I was happy to discover this would work and so well.  The models stayed affixed very well.

I started brushwork with a wash of Citadel “Nuln Oil” over both pieces.  I followed this with a heavy dry brushing with Citadel “Mechanicus Standard Gray”.  Then, I switched to Vallejo Model Air “Medium Gunship Gray” for the tripod legs (with a brush – no airbrushing was done on these models).  For the tripod feet, and the center mount, I used Vallejo Model Air “Steel”.  The gun itself was mounted on a rock-like structure on a washer disk.  I thought the rock made little sense for a robo sentry gun, so I decided to obscure it with Armory “Gloss Black” (still good from 1996!). I then shaded the tripod base with “Nuln Oil”.  I subsequently used Secret Weapons Washes “Heavy Body Black” on the base, followed by lightly dry brushing and stippling it with “Mechanicus Standard Gray”.

At this point, I glued the two pieces together with wood glue, and let the assembly dry overnight.  To further obscure the rock, I used Vallejo Model Air “Gold” on the washer – with an eye towards mimicking the coloration of the lunar modules from the Apollo missions.  I thought it worked well, though it took three coats to get it properly covered.

On the gun, I used Vallejo Model Air “Gun Metal”, with Vallejo “Aluminum” on the optics.  On the optics I then painted the ends with “Gold” and Citadel “Spiritstone Red”.  I finished the gun with Secret Weapons Washes “Armor Wash”, with some light highlighting with “Gun Metal”.  Once dry, I applied two coats of Testors “Dullcoat”, allowing for adequate drying between coats.



3 robo guns finished facing forward
Robo Sentry Guns facing forward



4 robo guns finished pic
Robo Sentry Guns in different poses



5 robo gun close up
Close up of Robo Sentry Gun
6 robo gun close up with Star Duck SFC Mallard
Showdown with SFC Mallard

I think these will be a nice addition to my Combat Patrol™ games, as I can use these in multiple situations as a GM.  I like the retro sci-fi look, and as I move into building a Robot army, these will fit in nicely (more to come on those in future blog posts).  I also added a photo to the Lost Minis Wiki on the model, as there was none there.  Still, sad to see that WSD will no longer produce these cool minis.


Author: Mark A. Morin

This site is where I will discuss stuff that I find interesting and that includes family, friends, golf, gaming, and Boston sports!

13 thoughts on “Robo Sentry Guns from WSD”

  1. Wow, mark, I hadn’t realised you were one of the people we’d sent stuff out to in that last month. great to see these painted up and glad you were pleased with them. I actually got these from Jason when I bought a 20mm sci/fi range off of him, so I think the were originally designed to be used with 20mm, but I thought they looked better with 28’s. I see whet you mean about the “rock” under the gun mount. I always took this as either a rubber or fabric cover protecting the mounts workings from dirt and shrapnel, (but that could of course be completely wrong).

    Great work on these, Cheers Roger.

    Liked by 1 person

    1. Thanks Roger, yes I was turned on to WSD by Buck Surdu. I am currently working on the Khang robots. Interestingly the Lost Minis wiki does not even have a listing for those? It would be nice for posterity to update that, but what are the nomenclature for them? I have the ones with the “Lost in Space” feet and the big boots, do you have the nomenclature? I will be using them as squad leaders for the Archive Mark III Warbots I convert and paint.


      1. They are Just, Khang Robot with legs, and Khang Robot Tracked. Sculpted by Bob Olley. Yes it would be nice to see them in the Lost Mini’s Wiki.

        Glad you like them, Buck is a top guy.

        Cheers Roger.

        Liked by 1 person

  2. Great work here Mark. They look great – get your photos up on the Lost Minis Wiki as well!

    As an aside – I find that (dark) red-browns work really well as a base coat for gold. Just something about the colour seems to have gold paint go over much more smoothly and effectively. If you’re ever after a darker, richer gold, Citadel’s “Retributor Armour” is amazing.

    Liked by 1 person

    1. Thanks and you’re right about the base coats for gold, I just originally was more concerned with obscuring the rock with the black. I’ll check out the Citadel Retributor Armour. I have to say I’m still loving the Vallejo Model Air metallics, nice paints!

      Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s